PBS Learning Management System

|ENGINEERING MATHEMATICS 3| exposes students to the statistical and probability concepts and their applications in interpreting data. The course also introduces numerical methods concept to solve simultaneous equations by using Gaussian Elimination method, LU Decomposition using Doolittle and Crout methods, polynomial problems using Simple Fixed Point Iteration and Newton-Raphson methods. In order to strengthen the students in solving engineering problems, Ordinary Differential Equation (ODE) is also included. In additional, the course also discusses optimization problems by using Linear Programming. It is designed to build students’ teamwork and problems solving skill

ELECTRICAL FUNDAMENTALS introduces students to the basic learning of electric system such as electrical fundamental & electron theory, DC sources of electricity and AC theory.

PNEUMATICS AND HYDRAULICS provides students with the knowledge and the application of pneumatics and hydraulics components and circuits such as power transmission and controller. This course stresses on the understanding of the importance of pneumatics and hydraulics component and circuit design.

AIRCRAFT STRUCTURE AND SYSTEM 2 provide students with further understanding of various aircraft airframe system continued from DWM 3113 Aircraft Structure and System 1. In general, hydraulic power, ice and rain protection, landing gear, lights, oxygen, pneumatic/vacuum, water/waste, on board maintenance systems, integrated modular avionics, cabin system and aircraft information systems are covered.

PROJECT 2 MERUPAKAN PROJEK AKHIR DIPLOMA KEJURUTERAAN PENYENGGARAAN PESAWAT (DAM)

The TECHNICAL DRAWING AND CAD course provides the students with the fundamentals of engineering drawings and the application of CAD software. Students will learn to apply the practical knowledge of drawing techniques and use some standard available features of a CAD application to create various design in engineering.

BASIC AERODYNAMICS covers the basic concepts of aerodynamics. The purpose of international standard atmosphere and basic aerodynamics terms are introduced. This is followed by the basic theory of flight, stability and lift augmentation, aircraft body construction, its instrumentation and the system that is required in its operation. The course will provide students with knowledge of basic aerodynamics based on scientific concepts and supplement the knowledge to be gained on the fundamentals of aircraft aerodynamics.

PISTON SYSTEMS course introduces the students to the fundamentals of piston engines and their associated systems. It covers the basic construction and operation of various types of piston engines and their major components in lubrication, fuel, air, starting, ignition, induction, exhaust, cooling and indication systems. The piston engine element is completed by discussion of power-plant installation, engine monitoring and ground operation.

TURBINE AEROPLANE AERODYNAMICS, STRUCTURE & SYSTEMS covers the construction and operation of the various systems in complex turbine powered aircraft from their basic layout to their operation and maintenance needs from the perspective of the aircraft mechanic. Systems are covered by ATA chapters and include the general structures of transport category aircraft and various systems such as electrical, fuel, flight controls, hydraulics, etc) and also including modern on-board electronics such as on-board maintenance computers, cabin systems, and information systems. You will learn by understanding concepts, not just rote memorization and you will learn to understand and apply this knowledge in the MRO of flightline environment.

AVIATION LEGISLATION has been design to cover the knowledge requirements of legal framework into aviation especially aircraft maintenance field. The regulatory framework divided into two, which are Airworthiness and Environmental Certification and Continuing Airworthiness. For Airworthiness and Environmental Certification, it is consist of Part-21 Aircraft Certification. While Continuing Airworthiness includes Part-M Continuing Airworthiness, Part-66 Certifying Staff, Part-145 Approved Maintenance Organisation and Part-147 Approved Training Organisation.

RELASIS SEM 1 PBS DIJALANKAN SECARA PEMBELAJARAN DAN PENGAJARAN DALAM TALIAN (PdPDT)

AVIONIC PRACTICES covers all basic skills such as safety precautions for workshop, implementation of workshop practices, handling the tools in basic learning of electric system, semiconductor components circuit and their application in basic electronic circuits, where components are soldered on a Printed Circuit Board (PCB). It also provides the basic concept and application of Digital Logic, Typical System Arrangement in Electronic Instrument System and Electrostatic Sensitive Devices.

ELECTRICAL FUNDAMENTALS introduces students to the basic learning of electric system such as electrical fundamental & electron theory, DC sources of electricity, AC theory, electromagnetism as well as motors and generators.

INDUSTRIAL SAFETY AND HEALTH equips the students with the necessary principles of industrial safety and environmental issues in order to recognize the hazardous situation at the workplace and therefore prevent accidents.

Ini adalah ruangan nota dan ujian bagi kelas Relasis 1

The TECHNICAL DRAWING AND CAD provides the students with the fundamentals of engineering drawings and the application of CAD software. Students learns to apply the practical knowledge of drawing techniques and use some standard available features of a CAD application to create various design in engineering.

MATERIALS AND HARDWARE course introduces the student to the application of knowledge on the type of engineering materials and their properties and materials treatment carried out for the aviation industry. The extensive use of composite materials, repair and their defect identification of aircraft materials are also discussed. It also includes the properties, characteristics, uses and identification of fastening devices, locking devices, rivets, pipes and unions, springs, bearings, electrical cables and connectors, process of heat treatment, testing and detection of defects. Corrosion and transmission system are also the important criteria to be considered in the selection of engineering materials.

PROPELLER SYSTEMS course introduces the student to basic terms associated with propeller control systems, operation and maintenance. All systems are covered including various types of pitch control, construction of propellers, propellers pitch control, explanation of propeller synchronization, ice control, vibration and resonance, maintenance and testing procedures and preservation and storage techniques.

MATHEMATICS introduces the fundamentals of the correct methods and procedures as a set of tools in engineering mathematics. It includes arithmetic operations and calculations, evaluation of algebra that uses letters or symbols to represent variables in formulas and equations, use graphs of mathematical data and relationship between the angles by using geometry and trigonometry in solving problems. 

PHYSICS introduce students with the fundamental theoretical knowledge, measurements and mathematical analysis which involved the application of physical laws and emphasizes on the concepts related to state of matters, mechanics, principle of thermodynamics and optics (light).    

HELICOPTER AERODYNAMICS, STRUCTURES AND SYSTEMS provide students with understanding in helicopter theory of flight. In addition, general concept of helicopter structures is emphasized. Various general helicopter systems e.g. flight control system, blade tracking and vibration analysis and transmission system are explained

SUCCESS IS NOT FINAL
FAILURE NOT FATAL
IT IS THE COURAGE TO CONTINUE THAT COUNTS

PNEUMATICS AND HYDRAULICS provides students with the knowledge and the application of pneumatics and hydraulics components and circuits such as power transmission and controller. This course stresses on the understanding of the importance of pneumatics and hydraulics component and circuit design.

BASIC AERODYNAMICS covers the basic concepts of aerodynamics. The purpose of international standard atmosphere and basic aerodynamics terms are introduced. This is followed by the basic theory of flight, stability and lift augmentation, aircraft body construction, its instrumentation and the system that is required in its operation. The course will provide students with knowledge of basic aerodynamics based on scientific concepts and supplement the knowledge to be gained on the fundamentals of aircraft aerodynamics.

ENTREPRENEURSHIP focuses the principles and concept of entrepreneurship. This course concentrates on the systematic methods of getting business ideas. This course also prepares students on conducting online business using social media marketing. It also emphasizes a preparation of business plan and developing their entrepreneurial skills.

Upon completion of this course, students should be able to:

explain clearly the concept of entrepreneurship and process of developing an effective business. (C2, LD1)

prepare completely a business plan according to standard format. (P2,LD2)

build the online business presence using the social media marketing. (P3,LD2) (A4, LD7)

COMMUNICATIVE ENGLISH 1 focuses on developing students’ speaking skills to enable them to communicate effectively and confidently in group discussions and in a variety of social interactions. It is designed to provide students with appropriate reading skills to comprehend a variety of texts. The students are equipped with effective presentation skills as a preparation for academic and work purposes.

ENTREPRENEURSHIP focuses on the fundamentals and concept of entrepreneurship in order to inculcate the value and interest in students to choose entrepreneurship as a career. This course can help students to initiate creative and innovative entrepreneurial ideas. It also emphasizes a preparation of a business plan framework through business model canvas

ENGINEERING DRAWING course provides the students with the fundamentals of technical drawings and the application Computer Aided Design (CAD) software. For technical drawing, it emphasizes on the practical knowledge of drawing instruments and drawing techniques while for CAD the student will learn to navigate and use the software to create 2D drawing design in engineering. Students shall be able to demonstrate competency in using some standard available features of technical drawing and CAD application to create and manipulate objects or elements in engineering drawing.

ENGINEERING AND SOCIETY focuses on the introduction to professional ethics, theory and philosophy of ethics, values in professional ethics, engineering bylaws and standards, issues in professional ethics and sustainability. It also relates towards IR 4.0 introduction and green engineering.

PNEUMATIC & HYDRAULICS provides knowledge and understanding to the importance of pneumatics and hydraulics circuits, equipment and design along with its usage in the industry.

MANUFACTURING SYSTEM explains the terminologies and concepts that are necessary in the learning of manufacturing system. It provides knowledge regarding fundamental of manufacturing system, industrial robotics, process layout, material handling systems and lean systems

Mohon lihat 2 video pn uma ini untuk buat lab. fahami dan lepas tu mohon buat lab pneumatic (lab-1  dan lab-  2 minggu ini dan kelas isnin hadapan kena present  dengan saya.

Instruction after study the video 1 and 2.

1.  Develop the group (4 Student Maximum per group)

2. Do the report lab by group. follow the lab sheet.

3. Monday (31 mei  2021) will be present to me to give the marks. (lab 1 and lab 2) for 31 mei 

4. Marks will be taken from report and group interview. 

ENGINEERING DRAWING course provides the students with the fundamentals of technical drawings and the application Computer Aided Design (CAD) software. For technical drawing, it emphasizes on the practical knowledge of drawing instruments and drawing techniques while for CAD the student will learn to navigate and use the software to create 2D drawing design in engineering. Students shall be able to demonstrate competency in using some standard available features of technical drawing and CAD application to create and manipulate objects or elements in engineering drawing.

Platform CIDOS untuk kursus DUW10022 Occupational Safety And Health For Engineering untuk para pelajar DTP.

Materials Science and Engineering course introduce students a comprehensive coverage of fundamentals of materials science and engineering. The course focuses on material structures, properties, fabrication methods, corrosion, thermal processing and material testing mostly of metals and alloys. The new fabrication method of powder metallurgy is introducing to the student to cater to the fabrications of devices, sensors for Industry 4.0 technology.

CAD/CAM course covers theory and basic of coding languages, structures and the use of CAD/CAM systems to generate and verify tool path. This course aims to expose students about integration between CAD and CAM operation inclusive object’s design, code producing, tool path simulation for machining operation and generate NC part programming. This course also covers the application on CAD/CAM software by transferring NC program to CNC milling/lathe machine.